3.8 Cubic Foot ICO105 CO2 Incubator With Dual Display, Stackable, CO2 and O2 Control, High Heat Decontamination Cycle, 115V

The Memmert ICO105 laboratory incubator for cell and tissue culture with CO2 and O2 control as well as humidity 

Temperature is controlled by two Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value

CO2 concentration is maintained using digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation.

Control CO2 concentration up to 20% and O2 concentration up to 20%

Humidity is controlled with a Peltier element. When the water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %

Memmert ICO105 CO2 incubator has a working temperature range of 5 degrees above ambient up to 50C

Built in high-heat sterilization process can be operated without removing the sensors 

AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface (temporary trial version can be downloaded).

USB stick with AtmoCONTROL software available as accessory (on demand)