Carboy spigots have large levers that control two flow rates, one for continuous, locked flow and the other for a faster, manual flow.

The spigot spout features 5/8" and 3/4" hose barbs, and a standard internal Luer tape to fit a male barb adapter.

The spigot body has internal threads with a hard stop to prevent over-tightening which may damage the seal.  

Spigots are made from polypropylene, which may be autoclaved at 15 PSI and 121˚C (250˚F) for 20 minutes.

• Two flow rates (continuous or manual)
• Made from Class VI autoclavable polypropylene
• Internal threads with a hard stop to prevent over-tightening